Listen to and control 433Mhz devices
Add cheap wireless power sockets, window and security sensors.
Wireless power sockets
Control lamps and other devices.
Connect doorbells and wall switches. These don't require batteries.
Wireless smoke sensors
Turn on all the lights when the smoke alarm goes off.
Door, window and motion sensors
Security doesn't have to break the bank.
Creating the Signal hub
Connect the receiver
Connect its data pin to pin 3.
Connect the transmitter
Connect its data pin to pin 4.
Connect the touch screen
Connect its TX (Transmit) pin to pin 5 and its RX pin (Receive) to pin 6.
Plug in the RF-Nano Arduino
Plug the RF-Nano into its socket. The USB connector should be on the outside of the main board.
Add your new device
Visit the Candle controller and on the things page press the (+) icon. Your new creation should be available. Optionally, select which of its properties you'd like to have in the spotlight. Click on "save" to complete the proces.
CO2 sensor module2019-03-22 14:04:38
This MH-Z19B module uses infrared to measure CO2 levels. This allows it to work accurately for a very long time. There are…
Touch screen2019-02-18 19:52:33
A touch screen offers a very versatile way of interacting.
433Mhz receiver and transmitter2019-01-21 19:33:29
This receiver and transmitter were selected because they don't require you to solder on an antenna. To save yourself $4…
Small OLED screen2019-01-21 18:59:57
This small screen is built with OLED technology. It uses very little power.
Raspberry radio adapter2018-08-28 18:03:15
This board makes plugging in the wireless module really easy.- Plug the NRF24L01 radio module into its socket.Foolproof!…
Radio module plus2018-08-10 12:32:15
This NRF24L01 radio, the "PA" version, has more range and sensitivity than its smaller brother. It uses a little more power…
Power supply2018-08-10 12:24:33
Your sensor or switch will need power. You can power it with a (second hand) 5 volt phone charger plugged directly into…
Radio module2018-08-10 10:35:41
All the devices communicate wirelessly with the main controller. They even relay messages to each-other so that the network…
Nano wireless board2018-08-10 10:27:46
Everything plugs into this board: the Arduino Nano, the radio, and the sensors and switches. It comes in different colours.
RF-Nano Arduino2018-08-10 10:21:43
The RF-Nano is an Arduino Nano with built-in wireless connectivity. It's the brain of all Candle devices. If you buy one…
Dupont wire2018-08-09 11:44:39
These wires allow you to easily connect the main board to sensors and actuators. They snugly fit over the pins. No soldering…
Soil sensor2018-08-07 09:51:32
This is a capacitive soil sensor. The advantage of this type is that it does not rust. It works the same way that a touchscreen…
SMS modem2018-08-07 09:44:13
This A6 GPRS modem allows you to send and receive SMS. It has a Micro-USB port which makes it easy to provide it with the…
Temperature, humidity and barometer sensor2018-08-06 21:16:28
It's amazing how much such a tiny and cheap sensor can do! The BME280 is basically a weather station the size of a penny. …
Light pulse sensor2018-08-06 20:38:55
This 'photo diode' can count the light pulses that your electricity meter gives off.
Expansion board2018-08-06 19:36:08
This expansion board makes it easy to connect everything by just plugging in wires.